Adding the San Diego Office Printer
*Post San Diego office-move to the new temp space, the Xerox printer must now be manually added to your computer with the steps below.
1. From your computer's Start menu, search for & open Control Panel
2. In Control Panel, click View devices and printers
3. Click Add a printer
4. Click The printer that I want isn't listed
5. Select Add a printer using an IP address or hostname then click Next
6. Add Printer:
a. Set the Device type to Autodetect.
b. Fill the Hostname or IP address field with this IP address 10.13.10.211 (the Port name field will auto populate, leave as is).
c. Make sure the checkbox is FILLED for "Query the printer and automatically select the driver to use".
d. Click Next
7. Select Use the driver that is currently installed (recommended). Click Next.
8. In the Printer name field, type Harbor Printer. Click Next.
9. Print a Test Page and click Ok.
10. Check if the printer successfully printed the Test Page.
11. (Optional) To set this printer as your default printer:
a. Go back to Control Panel
b. View devices and printers
c. Right-click the newly added printer named Harbor Printer
d. click Set as default printer